Set of CBN stones (100, 200, 400, 800, 1200 grit, for Ermak and systems like EdgePro)

Attention: these sharpening stones are made of steel (not stainless steel) so they can rust if they are not stored dry after sharpening.

so after sanding clean and rub dry then nothing happens. it is best to oil something like a carbon steel knife (release spray) and be absolutely sure.

No more dressing whetstones. This set makes it possible. It is milled from solid steel from one piece and the surface has been coated with CBN.

The grinding performance is outstanding. Not to be compared with normal stones at all.

Due to its own weight of approx. 190 grams, no pressure at all needs to be exerted when sanding. The stone practically grinds by itself.

Dimensions 160mm long

Grinding surface 150mm

Width 25mm

Weight per stone 195 grams

This set, consisting of 5 different grits, actually covers everything that needs to be sanded and when.

The 100 grit stone is intended for creating a new cutting edge or for sharpening angles.

It goes incredibly quickly with it.

The 200 stone is the one you usually start with when working on a cutting edge. As a rule, it is sufficient to go over the cutting edge twice from each side in order to have a clearly defined new cutting edge. then 1 time back and forth over 400-800-1000 and the cutting edge is ready for polishing.

Or you go straight over the leather after the 1000.

Sharpness guaranteed.