Leather wheel T4 200x35mm (smooth side to the outside)

Leather wheel T4 200x35mm (smooth side to the outside)

59,00 

5 in stock

SKU: SJ17731 Categories: , ,

You need a spacer for this or get some washers to mount on the stone side.

Made in Germany 🙂

Finally a leather of the same size as the grinding wheels. The wheel is made of 3 MDF panels (glued waterproof) and an approx. 3mm thick leather was applied here using contact adhesive.

The attachment angle of the knife is therefore the same as that of the grinding wheels, which should ensure an optimal polishing result.

The dimensions are as close as possible to 200mm but can differ in the 1mm range due to the leather (natural product). Also, due to the leather, the structure is not always the same. However, only high quality leathers are used. The smooth side of the leather wheel is turned outwards.

Ideally suited for the finish of the cutting edge to a high gloss with 0.25 micron diamond spray (policrystalline)

Optionally, it fits perfectly with my shaft extension for the felt wheel on the leather wheel side. The shaft extension can remain in the wheel, guaranteeing assembly in seconds.

A spacer and a knurled screw are required for this.

Weight 0,8 kg
Dimensions 20 × 20 × 4 cm
outer diameter

Bohrung

width